What Is The Correct Width For Curtains?

How wide should curtains be for 72 inch window?

To get the measurements, measure the width of the rod from left to right.

For instance, if your window measures 72” wide, you will need curtains that will give a maximum width of 144” (window width x 2 = 144”.).

Is the width of a curtain per Curtain?

All of our ready made curtain sizes are labelled with ‘width by drop’ sizing, so the first number is always the measurement across, and the second is always the measurement down. Our ready made curtains are sold in pairs, and the size refers to each individual curtain.

How do curtain sizes work?

For example, in a pair of curtains 46″ wide x 54″ length, there will be two curtains, each measuring 46″ wide. To calculate the size of curtain you require, the total width of the curtains should be no less than one and a half the width of your window.

How much width of fabric do I need for curtains?

Fabric calculations – Most curtains will require somewhere between 1 ½ and 2 ½ times fullness, depending on the heading and look you want to achieve. I always prefer to be generous and use 2 ½ times the width, skimpy curtains don’t look good and you can always use any extra fabric for cushions or tie backs.

How wide should my curtains be?

How Wide Should Curtains Be? To ensure that panels look ample and drapey when closed, they should have a combined width that is 2 to 2½ times the width of the window. Exceptions: If you’re hanging curtains just to frame a window and don’t intend to shut them, you can round down to 1½ times the width.

What is the widest width of ready made curtains?

90 inch wide90 inch wide curtain tend to be the widest width available in ready made curtains, and so will fit most larger and patio windows. This makes it easy for you to find matching curtains for every window in your home.

How wide should curtains be for 100 inch window?

between 200 and 250 inchesHow Wide Should Curtains Be For A 100-Inch Window? The average curtain bought to hang on a 100-inch window should measure between 200 and 250 inches wide. To achieve appropriate fullness with thinner material, get curtains upward of 300 inches wide. For decorative purposes, you can go 150 inches in width.

Do I need one or two curtain panels?

While it may seem logical that curtains should come in sets of two, curtains do not always come in pairs. They most often come in panels. Panels are a single piece of fabric or one curtain. If you want a typical curtain pair, you will need to buy two panels.

How do you measure a window for curtains?

Measure the width of your window across, from plaster to plaster, and from top to bottom. Then add on 6” (15cm) above the window and 6 – 10” (15-25cm) either side of the window to allow for the pole/rail size. This is to allow the curtains to clear the window when open, maximising the light into your room.

Do eyelet curtains need to be double width?

You need to allow for both flat panels to be a minimum of one and a half times the curtain pole width. I personally think they look much better at double the pole width. … To work out the length (drop) for your new eyelet curtains. you will need to hold the tape measure at the top edge of the curtain pole.

What are common curtain widths?

The most common premade lengths are 63, 84, 95, 108 and 120 inches. Widths vary, but most are 45 inches wide. More than one panel is usually necessary to cover standard window designs.

Does it matter if curtains are too wide?

A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more – sheers can be 3 times the window width) to achieve a look of proper fullness.

How wide should curtains be for 60 inch window?

Example: For a 60-inch window with two curtain panels, add 24 inches to 60 inches (window width) and divide by 2 (number of panels) to get 42 inches. The two panels ordered each need to be at least 42 inches wide.

How much wider Should a curtain rod be than the window?

When installing curtain rods, hang the rod so that it extends at least 3 or 4 inches beyond the window on each side, which allows your curtains to overlap both the window and the wall to prevent light from leaking in around the window’s edges.